50*7 Small Swelling Rate Screen Printing Squeegee For Stickers

Before use

• Squeegees must not be stored in sunlight or bright light – UV Light will darken the squeegee colour, although this will not have a negative affect on the quality of its performance.

• Try to store squeegees between 15°C – 25°C in dry conditions and away from inks – in high humidity squeegees will absorb moisture and solvents from the air.

• Store squeegees flat, do not leave rolled up.

• When using a roll, leave flat for 24 hours so the squeegee has time to relax.

In use

• Squeegees should be cleaned immediately after use to prevent the accumulation of dried-up ink.

• Remove all remaining ink deposits from the holder and the squeegee. Any remaining ink can cause marks from the squeegee during subsequent printing operations.

• Print quality may deteriorate during a long run as the sharp edge is lost; therefore plan to swap the squeegee early. Rounded edges use and deposit more ink.

• When storing a squeegee still mounted in the holder, do not rest it on the squeegee or allow the squeegee to touch anything during storage.

• Squeegees or their holders must not be left in solvents to soak. Soaking will cause swelling and loss of resilience.

• When cleaning the squeegee use a soft cloth and always wipe away from the edge.

• To prolong the life of a squeegee, ‘rest’ it for 12 hours after cleaning and before the next printing operation starts.

Grinding/sharpening

• You should not be required to sharpen a squeegee prior to use.

• Only sharpen a squeegee that is clean, dry and has not been used for printing for at least 12 hours.

Gezi screen mesh factory is one of the leading manufactuer and exporter of all kinds of screen mesh products in China.
We' re concentrated in Screen printing mesh, Flour sieve mesh,Nylon filter mesh,Polyester filter mesh,PE mesh, HDPE filter mesh,Insect net, Mesh filter bag, Mesh filter disc, ect. All mesh products have passed Quality Management System ISO 9001 :2008.
We also have complete factory inspection report, no sillicon certificate, 100% nylon or polyester material certificate, mesh aperture size certificate, etc.
Our screen mesh workshop is equipped with 100 Swiss Sulzer ruti weaving machines, 4 Benninger high speed warping machines, 1 water washing heat setting machines. The width of weaving machines: 280cm, 330cm, 360cm, 390cm.

Our PE or HDPE worhshops have 80 looms, with 10-15 workers, 3 sets drawing workshops, with big output per year.

Countries USA, Canada, Mexico, Venezuela, UK, Spain, Pakistan, Thailand, Malaysia, Turkey, Australia, Egypt, India, Brazil,etc. are main exporters of us at present, and other customers from Europe, America, Middle east, Southeast Asia,
The most important is that we have very systemic and strict staff policy. Our quality management teams are all strict persons and machines, the system has also been successfully approved by the ISOQAR to the standard ISO9001:2000.
The mesh is mainly used in silk screen printing, flour area, filtration area, insect proofing, etc.

Our Mission is: Best quality and price products speak louder than anything!

​