50*9 Blue Hard To Wear Screen Printing Squeegee For Ceramics

Screen printing squeegee hardness

This is a measure of indentation resistance. The hardness of squeegees is measured in Shore A° (Durometer), usually covering a range of grades from 55° to 95° as a means of identification for the industry. Gezi squeegee offers strict 5° hardness bands, and guarantees the printer a more repeatable performance. Hardness plays a main role in a blade's deformation and wear.

Choosing the hardness

There are generally three broad categories of hardness, which includes soft, medium or hard. Ranging from 55° to 95° Shore A, in 5° increments.

Soft Grades

Gezi 55 60 65 shore A

Generally used for medium squeegee pressure with large mesh opening and low viscosity inks. They are ideal for irregular substrates and uneven beds. They will deposit a high amount of ink with medium detail control. In general, softer squeegees increase ink deposit. Ideal for use with large colored surfaces and glazes, in addition to glass and ceramics. Gezi recommendations are for standard pressures, medium stroke of printing speeds and standard squeegee angles.

Medium Grades

Gezi 70° 75° shore A

For higher squeegee pressure with a wide range of mesh count and inks. Will give good ink deposit and fine detail control and are used for nearly all applications.

Hard Grades

Gezi 80° 85° 90° shore A

For maximum squeegee pressure and high viscosity inks. Gives lower ink deposit and good, fine detailed control. Used mainly for fine-meshed screens and thin ink layers. Different squeegee manufacturers may produce blades with the same hardness, but the elastic modulus can differ from one producer's squeegee to another. This can have a marked effect on performance. Gezi squeegees are manufactured to tight specifications thus minimi sing print variables. The hardness value influences the way the squeegee aligns to the surface and determines the level of printing force required to achieve the transfer of ink through the screen. The softer the grade the more adaptable the squeegee to the surface and less printing force is required.

Standard Hardness

Soft 55 60 65 shore A red or natural

Medium 70 75 shore A green or natural

Hard 80 85 shore A blue or natural

Super hard 90 95 shore A white

Tripe medium 75/ 90/ 75 shore A green/white/green

Tripe soft 65/90/65 shore A red/white/red

Other hardness and colors are available on request

Gezi screen mesh factory is one of the leading manufactuer and exporter of all kinds of screen mesh products in China.
We' re concentrated in Screen printing mesh, Flour sieve mesh,Nylon filter mesh,Polyester filter mesh,PE mesh, HDPE filter mesh,Insect net, Mesh filter bag, Mesh filter disc, ect. All mesh products have passed Quality Management System ISO 9001 :2008.
We also have complete factory inspection report, no sillicon certificate, 100% nylon or polyester material certificate, mesh aperture size certificate, etc.
Our screen mesh workshop is equipped with 100 Swiss Sulzer ruti weaving machines, 4 Benninger high speed warping machines, 1 water washing heat setting machines. The width of weaving machines: 280cm, 330cm, 360cm, 390cm.

Our PE or HDPE worhshops have 80 looms, with 10-15 workers, 3 sets drawing workshops, with big output per year.

Countries USA, Canada, Mexico, Venezuela, UK, Spain, Pakistan, Thailand, Malaysia, Turkey, Australia, Egypt, India, Brazil,etc. are main exporters of us at present, and other customers from Europe, America, Middle east, Southeast Asia,
The most important is that we have very systemic and strict staff policy. Our quality management teams are all strict persons and machines, the system has also been successfully approved by the ISOQAR to the standard ISO9001:2000.
The mesh is mainly used in silk screen printing, flour area, filtration area, insect proofing, etc.

Our Mission is: Best quality and price products speak louder than anything!

​